Keo thay thế gioăng loctite 518

LOCTITE 518 is a medium-strength, general purpose gasketing product with excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges.

LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

- Semi-flexible, medium-strength anaerobic flange gasket

- Easy to automate

- Reduces process costs – eliminates manual assembly of conventional gaskets

- NSF P1 Reg. No. 123758

- For active and inactive rigid metal flanges

- Cures through minor surface contamination

- Adapts to flange surface irregularities and gaps up to 0.25 mm

- Gel-type consistency

- Seals instantly against low pressure

- Reduces inventory costs – no need for large inventory of cut gaskets

- Resists high pressure when fully cured

- No compression set or misaligned gaskets